Characteristics of the DAREX XT-3000 AUT spiral drill grinder
- Mechanically driven grinding process
- Simple operation, operator does not have to turn the clamping chucksr
- Very efficient grinding process
- Longer lifespan for the grinding disc through gentle grinding
- Ideal for grinding unusually long spiral drills, at least 400 mm
- Considerable increase in output thanks to second pre-set clamping chuck
- Creates a supplemental work station cost-effectively
- Counter provides precise overview of costs
- Pre-programming of the grinding and finishing processes
Equipment for the DAREX XT-3000 AUT spiral drill grinder
- 5-jaw precision-clamping chuck RH with integrated cam disc
Grinding range 3.0 – 12.0 mm
Art. No.: 35771
- 7-jaw precision-clamping chuck RH with integrated cam disc
Grinding range 12.0 - 21.0 mm
Art. No.: 35772
- CBN-angle-grinding disc K180
Art. No.: 35030
- CBN-edge reduction-grinding disc K180
Art. No.: 35037
- Operating instructions
| Motor data | 0.2 KW - 2,850 r/min - 50 Hz |
| Noise level | Well below 70 dB |
| Voltage | 230 VAC +/- 5% |
| Dimensions (W x L x H) | 410 x 410 x 260 mm |
| Weight | 26.0 kg |
- Grinding apparatus for spiral drills 21.0 – 30.0 mm
Art.-No.: 48002
- Grinding apparatus for NC-tapping drills 90° – 120°
Clamping range 3.0 – 12.0 mm
Art.-No.: 48003
- Clamping chuck for NC-tapping drill 90° – 120°
Clamping range 12.0 – 21.0 mm
Art.-No.: 35759
- Grinding apparatus for 3-blade counter sink with point angle 90° – 120°
Art. No.: 48004 (requires options 48007, 48008, 35769, 35770)
- Grinding apparatus for stepped drill
incl. 1 clamping chuck, grinding range 3.0 – 12.0 mm
Art. No.: 48006 (requires cross table Art. No.: 48007)
- Cross table for options counter sink and stepped drill-grinding apparatuses
Art.-No.: 48007
- DIA-grinding disc-set consisting of:
Art.-No.: 48015
1 Pc. DIA-angle-grinding disc K 360
Art.-No.: 35203
1 Pc. DIA-edge-reducing grinding disc K 220
Art.-No.: 35205
- Extractor plant with powerful suction
very low noise
Art.-No.: 48022
