Characteristics of the DAREX XPS 16+ CNC spiral drill grinder
- Simple and transparent programming using „touchscreen-input" in an easily comprehensible display
- Optionally with conical grinding or surface grinding
- Continuous adjustment of point angle from 90°–150° in 1° increments
- Correction of the chisel edge position over the ADV setting without changing the relief grinding
- Adjusting the relief grinding from 0–18°
- All important functions in the point geometry can be corrected if necessary (e.g.: Z+X axis, opening angle, web width, radius-edge reduction)
- Positioning of the drill using sensor light technology which guarantees precision of repetition
- Coordinated grinding disc stock for the highest demands and durability and surface
- 2Automatic brushing process for rounding off edges on the carbide spiral drill
- 24 saveable settings for creating an individual file
Equipment for the DAREX XPS 16+ CNC spiral drill grinder
- Precision-clamping chuck with 6 clamping pins
- CBN-grinding disc, metal mounting
Diameter 115 mm, grain 180
Art. No.: 35145 - DIA-Grinding disc, metal mounted
Diameter 115 mm, grain 220
Art. No.: 35139 - Extraction plant (also suitable for case-hardened steel grinding dust)
Art. Nr.: XXXXX - Extensive Handbook, German
Art. No.: 14809
Drill types | 2-edge spiral drill made of carbide and CH steel |
Point geometries | Conical and surface grinding |
Point angle | 90° - 150° (increasing at 1° intervals) |
Diameter | 2.3 – 16.0 mm |
Total length | 50 - 220 mm |
Grinding discs | CBN-grain 180/Diam. 115 mm (incl. Art. No. 46014) |
DIA-grain 220/Diam. 115 mm (incl. Art. No. 46014 and 46011) |
|
Relief grinding | 2° – 18° (increasing in 1° intervals) |
Point variants | Sharp-edged or with radius |
Ablation | Fine, medium, coarse |
Memory storage | For 100 specific geometries |
Rotation speed | 2,850 r/min |
Voltage | 230 Volt / 50 Hz / 4 Amp. |
- CBN-grinding discs, metal mounted
Art.-No.: 35143 K130
Art.-No.: 35145 K180
Art.-No.: 35148 K220
- CBN-grinding discs, artificial resin mounted
Art.-No.: 35180 K220
- DIA-grinding discs, metal mounted
Art.-No.: 35147 K130
Art.-No.: 35144 K180
Art.-No.: 35139 K220
- Brush for edge rounding on case-hardened spiral drills
Art.-No.: 46010
- U-disc with 3 bolts for brush mounting (46014)
Art.-No.: 46013
- Extraction plant
Art.-No.: 48022
- Base cabinet
Art.-No.: 29725